N2XSY-1 core CU XLPE PVC without armor

ＤＡＹＡ Cables' range of 10kV cables covers single core and three-core copper and aluminium conductor cables, available with PVC or Polyethylene (PE) sheathing and the addition of waterblocking measures including swellable powders and tapes. IEC 60502-2 cables using German/Austrian naming conventions (N/NA) and Portuguese naming (XH/LXH) are included below. With the primary purpose being power distribution, the aluminium conductor cables are frequently specified over copper conductors in 6/10kV networks where installations are not restricted by space.

10kV cables have a copper wire screen (often with a copper tape in counter-helix) offering a degree of mechanical as well as limited electromagnetic protection, but it's main purpose is for earthing. The cables are unarmoured so are not suitable for direct burial without additional measures (but . Medium Voltage cables with black sheaths have an increased carbon black content and so offer better UV resistance when installed outdoors.

Some of our 10kV Cables

These European standard unarmoured cables are also available in 20kV and 30kV voltages. Please refer to the PDF specification sheets for further information.

10kV Cable Technical Advice

As Medium Voltage cable specialists, our experts in The Cable Lab are well-placed to assist you in questions regarding 6/10kV cable specification, cable installation environments, MV cable accessories and technical queries on current carrying capacity and ratings factors. Please contact them for advice specific to your application and installation.

DAYA N2XSY-1 core CU XLPE PVC without armor Details

DAYA N2XSY-1 core CU XLPE PVC without armor Working conditions

Specifications:

Size (AWG or KCM): 636.0

Stranding (AL/STL): 26/7

Diameter Inches: Aluminum: 0.1564

Diameter Inches: Steel: 0.1216

Diameter Inches: Steel Core: 0.3648

Diameter Inches: Cable OD: 0.990

Weight lb/1000FT: Aluminum: 499.

Weight lb/1000FT: Steel: 276.2

Weight lb/1000FT: Total: 874.1

Content %: Aluminum: 68.53

Content %: Steel: 31.47

Rate Breaking Strength (lbs.): 25,200

OHMS/1000ft: DC at 20ºC: 0.0267

OHMS/1000ft: AC at 75ºC: 0.033

Ampacity: 789 Amps

Packing:

--100m/Coil with Shrinking Film Wrap, 6 Coils per outer carton.

--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,

--200m or 250m per Drum, two drums per carton,

--305m/Wooden Drum, one drum per outer carton or pallet loading,

--500m/Wooden Drum, one drum per outer carton or pallet loading,

--1000m or 3000m wooden drum, then pallet loading.

*We can also offer customized OEM packing according to clients' request.

Delivery:

Port: Tianjin, or other ports as per your requirements.

Sea freight: FOB/C&F/CIF quotation are all available.

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

DAYA N2XSY-1 core CU XLPE PVC without armor Parameter (Specification)

DAYA N2XSY-1 core CU XLPE PVC without armor Service

Pre-sales

We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.

After-Sales

If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.

Our customer service promise

1. We will quickly solve the problem after receiving the issue report or repair request.

2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.

3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.

4. If your complaint is deemed valid, we will refund repair fees to you on-site.

DAYA N2XSY-1 core CU XLPE PVC without armor FAQ

1.Q: Are you a manufacturer or trader?

A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming.

2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?

A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.

3.Q: Why should I buy from you instead of someone else?

A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.

4.Q:What about the delivery time?

A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the

quantity of products.

5.Q:What about the shipment?

A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.

6.Q:How about the terms of payment?

A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.