PVC cable conductors use tinned copper wire. Sizes vary from 30 American Wire Gauge (AWG) to 4/0. Conductors consist of multiple strands of thin copper wire. An extruded PVC insulation covers the conductor. Depending on individual wire specifications, the insulation may be relatively stiff or flexible. In the case of UL 1581 multicore wire, individual conductors use cross-linked polyethylene (XLPE) insulation and a PVC jacket.
PVC is a versatile thermoplastic material. Although naturally hard and inflexible, the addition of plasticizers, stabilizers, and fillers allows manufacturers to change material properties to achieve a required degree of flexibility and strength. PVC is a long-lasting plastic that with the addition of ultraviolet (UV) stabilizers has a service life that can exceed 30 years. PVC is naturally self-extinguishing, and certain grades of PVC wire are suitable for use in plenum chambers. Most PVC cables from Allied Wire and Cable (AWC) pass the VW-1 flame retardancy test and comply with the Restriction of Hazardous Substances (RoHS) directive.
PVC wire applications include the internal wiring of electronic equipment, electrical panels, switchboards, transformers, and electrical appliances. Other PVC cable applications include power cables and portable cords and automotive cables.
UL PVC Wire Varieties
AWC carries a wide range of UL-approved PVC wires. It's important to note that voltage and temperature ratings may differ so you should check the specific wire specifications sheet before buying. Many types also have Canadian Standards Association (CSA) approvals.
UL 1007
This appliance wire is suitable for use at 300 volts. It's UL rated for use at 80 degrees Celsius, and in non-UL applications, has a working temperature range from -40°C up to 105°C. It's resistant to fungus, solvents, oils, and chemicals.
UL 10070
This wire has a maximum temperature rating of 105°C and is suitable for voltages up to 300 volts. It has good cutting and stripping characteristics and is commonly used in computers and electronic equipment
UL 1015
UL style 1015 wire has a maximum voltage of 600 volts and a temperature rating of 105°C. It has marine approvals for 16-10 AWG sizes. The wire is oil- and grease-resistant to a maximum temperature of 80°C.
UL 1061
The hook-up wire has a maximum voltage of 300 volts and a maximum usable temperature of 80°C. It has tough, abrasion-resistant semi-rigid insulation.
UL 1065
UL 1065 wire has self-extinguishing characteristics and a maximum usable voltage of 600 volts. It's often used for machine tools and has a maximum temperature rating of 90°C as a flexible conductor and 105°C when secured.
UL 1581
This is a multicore cable with XLPE insulation, a PVC jacket, and an aluminum polyester foil shield. It's rated for a maximum working temperature of 90°C.
--100m/Coil with Shrinking Film Wrap, 6 Coils per outer carton.
--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,
--200m or 250m per Drum, two drums per carton,
--305m/Wooden Drum, one drum per outer carton or pallet loading,
--500m/Wooden Drum, one drum per outer carton or pallet loading,
--1000m or 3000m wooden drum, then pallet loading.
*We can also offer customized OEM packing according to clients' request.
Port: Tianjin, or other ports as per your requirements.
Sea freight: FOB/C&F/CIF quotation are all available.
*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.
DIMENSIONANDWEIGHTS |
ELECTRICALPROPERTIES |
|||||
Nominal CrossSection |
Overall Diameter (approx) |
NetWeight (approx) |
Delivery Length |
DCConductor Resistanceat 20 CMax |
Current Carrying Capacity(A) |
|
mm² |
mm |
kg/km |
m |
ohm/km |
In groundat 20 C |
In airat 30 C |
5x1.5 |
15.0 |
420 |
1000 |
12.1 |
21.0 |
18.0 |
6x1.5 |
16.5 |
470 |
1000 |
12.1 |
19.5 |
16.8 |
7x1.5 |
16.5 |
480 |
1000 |
12.1 |
18.0 |
15.6 |
8x1.5 |
18.0 |
670 |
1000 |
12.1 |
16.5 |
14.4 |
10x1.5 |
19.5 |
800 |
1000 |
12.1 |
15.0 |
13.2 |
12x1.5 |
20.0 |
850 |
1000 |
12.1 |
14.3 |
12.6 |
14x1.5 |
20.5 |
900 |
1000 |
12.1 |
13.5 |
12.0 |
16x1.5 |
21.5 |
950 |
1000 |
12.1 |
12.8 |
11.4 |
19x1.5 |
22.0 |
1050 |
1000 |
12.1 |
12.0 |
10.8 |
21x1.5 |
24.0 |
1300 |
1000 |
12.1 |
11.3 |
10.2 |
24x1.5 |
25.5 |
1450 |
1000 |
12.1 |
10.5 |
9.6 |
27x1.5 |
26.0 |
1500 |
1000 |
12.1 |
10.2 |
9.4 |
30x1.5 |
27.0 |
1600 |
1000 |
12.1 |
9.9 |
9.1 |
37x1.5 |
28.5 |
1800 |
1000 |
12.1 |
9.3 |
8.6 |
40x1.5 |
29.5 |
1950 |
1000 |
12.1 |
9.0 |
8.4 |
48x1.5 |
32.0 |
2250 |
1000 |
12.1 |
8.4 |
7.9 |
52x1.5 |
32.5 |
2350 |
1000 |
12.1 |
7.8 |
7.4 |
61x1.5 |
35.5 |
2900 |
1000 |
12.1 |
7.5 |
7.2 |
We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.
If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.
1. We will quickly solve the problem after receiving the issue report or repair request.
2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.
3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.
4. If your complaint is deemed valid, we will refund repair fees to you on-site.
1.Q: Are you a manufacturer or trader?
A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming.
2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?
A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.
3.Q: Why should I buy from you instead of someone else?
A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.
4.Q:What about the delivery time?
A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the
quantity of products.
5.Q:What about the shipment?
A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.
6.Q:How about the terms of payment?
A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.