Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.
Voltage Rating: 600/1000 volts
Temperature Rating: Fixed: -15°C to +90°C
Minimum Bending Radius: As Per Manufacturers Datasheet.
Should not be installed at temperatures below 0°C or above +60°C
Conductor: Class 2 stranded copper conductor acc BS EN 60228 (previously BS 6360)
Insulation: Cross Linked Polyethylene (XLPE)
Bedding: PVC (Polyvinyl Chloride)
Armour: SWA (Steel Wire Armour)
Sheath: PVC (Polyvinyl Chloride)
0.6/1 kV LOW VOLTAGE CONTROL CABLES – NCI
Conductors shall be Circular Stranded, Class 2 as per IEC 60228, BS EN 60228. … Standard Colour Code ….. b) Control Cables with Copper Wire Screen.
Size (AWG or KCM): 636.0
Stranding (AL/STL): 26/7
Diameter Inches: Aluminum: 0.1564
Diameter Inches: Steel: 0.1216
Diameter Inches: Steel Core: 0.3648
Diameter Inches: Cable OD: 0.990
Weight lb/1000FT: Aluminum: 499.
Weight lb/1000FT: Steel: 276.2
Weight lb/1000FT: Total: 874.1
Content %: Aluminum: 68.53
Content %: Steel: 31.47
Rate Breaking Strength (lbs.): 25,200
OHMS/1000ft: DC at 20ºC: 0.0267
OHMS/1000ft: AC at 75ºC: 0.033
Ampacity: 789 Amps
--100m/Coil with Shrinking Film Wrap, 6 Coils per outer carton.
--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,
--200m or 250m per Drum, two drums per carton,
--305m/Wooden Drum, one drum per outer carton or pallet loading,
--500m/Wooden Drum, one drum per outer carton or pallet loading,
--1000m or 3000m wooden drum, then pallet loading.
*We can also offer customized OEM packing according to clients' request.
Port: Tianjin, or other ports as per your requirements.
Sea freight: FOB/C&F/CIF quotation are all available.
*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.
Nominal cross section al area |
ELECTRICALDATA |
DIMENSIONS AND WEIGHTS |
Cable Code |
|||||||||
Max.Conductor Resistance |
Continuous Current Ratings |
Approx. overall diameter |
Approx. overall weight |
|||||||||
DC at 20 °C |
AC at 90 °C |
Buried direct in ground |
In buried ducts |
Infree air |
||||||||
mm² |
Ω / km |
Ω / km |
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |
(g) |
|||
A |
A |
A |
A |
A |
A |
A |
mm |
kg / km |
||||
6 |
3.0800 |
3.9273 |
59 |
59 |
49 |
54 |
60 |
61 |
75 |
13.0 |
255 |
C213XA1010AMB51IMR |
10 |
1.8300 |
2.3335 |
78 |
78 |
65 |
71 |
80 |
82 |
100 |
13.6 |
300 |
C314XA1010AMB51IMR |
16 |
1.1500 |
1.4665 |
99 |
99 |
83 |
91 |
105 |
107 |
132 |
14.6 |
380 |
C315XA1010AMB51IMR |
25 |
0.7270 |
0.9272 |
127 |
127 |
107 |
117 |
138 |
141 |
172 |
16.2 |
500 |
C316XA1010AMB51IMR |
35 |
0.5240 |
0.6685 |
151 |
151 |
128 |
139 |
168 |
171 |
208 |
17.2 |
615 |
C317XA1010AMB51IMR |
50 |
0.3870 |
0.4939 |
178 |
178 |
152 |
163 |
202 |
206 |
249 |
18.8 |
765 |
C318XA1010AMB51IM |
70 |
0.2680 |
0.3424 |
217 |
215 |
189 |
198 |
253 |
257 |
307 |
20.6 |
1000 |
C319XA1010AMB51IMR |
95 |
0.1930 |
0.2471 |
257 |
255 |
223 |
234 |
308 |
310 |
366 |
22.4 |
1285 |
C345XA1010AMB51IMR |
120 |
0.1530 |
0.1964 |
290 |
287 |
253 |
263 |
354 |
354 |
413 |
24.1 |
1560 |
C346XA1010AMB51IMR |
150 |
0.1240 |
0.1598 |
323 |
318 |
284 |
291 |
403 |
400 |
461 |
26.0 |
1860 |
C347XA1010AMB51IMR |
185 |
0.0991 |
0.1286 |
361 |
354 |
320 |
322 |
461 |
453 |
512 |
28.3 |
2270 |
C348XA1010AMB51IMR |
240 |
0.0754 |
0.0991 |
411 |
401 |
367 |
360 |
539 |
521 |
579 |
31.0 |
2870 |
C349XA1010AMB51IMR |
300 |
0.0601 |
0.0805 |
456 |
440 |
410 |
391 |
612 |
583 |
637 |
33.6 |
3475 |
C350XA1010AMB51IMR |
400 |
0.0470 |
0.0647 |
494 |
472 |
450 |
410 |
685 |
628 |
672 |
38.2 |
4535 |
C351XA1010AMB51IMR |
500 |
0.0366 |
0.0527 |
539 |
511 |
497 |
439 |
770 |
691 |
729 |
42.2 |
5715 |
C352XA1010AMB51IMF |
630 |
0.0283 |
0.0436 |
582 |
547 |
541 |
465 |
854 |
749 |
783 |
46.4 |
7130 |
C353XA1010AMB51IMF |
800 |
0.0221 |
0.0367 |
599 |
565 |
564 |
481 |
908 |
781 |
829 |
52.3 |
9240 |
C354XA1010AMB51IMF |
1000 |
0.0176 |
0.0324 |
629 |
595 |
601 |
513 |
996 |
849 |
915 |
61.1 |
11550 |
C255XA1010AMB51IMF |
We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.
If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.
1. We will quickly solve the problem after receiving the issue report or repair request.
2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.
3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.
4. If your complaint is deemed valid, we will refund repair fees to you on-site.
1.Q: Are you a manufacturer or trader?
A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming.
2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?
A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.
3.Q: Why should I buy from you instead of someone else?
A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.
4.Q:What about the delivery time?
A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the
quantity of products.
5.Q:What about the shipment?
A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.
6.Q:How about the terms of payment?
A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.